General Feature: > Rated Power: 10W
> LED Quantity: 1pcs Edison Integrated High Power LED
> Infrared Induction Distance: 10 Meters Max.
> Duration of light on: 5 Sec – 10 Min (adjustable).
> Induction Angle: 120 Degrees
> Working Voltage: 85-264Vac, 50/60Hz; 24VDC
> Power Factor: 0.95 Min.
> Power Efficiency: 85% Min.
> Luminous Flux: 890LM +/-10%
> Projection Distance: 8 Meters, recommend.
> Colour Rendering Index: 80 Ra.
> Colour Temperature: 2000K - 6500K
> Beam Angle: 60/120 Degrees.
> Working Temperature: -40 - 55 Deg.C
> Working Humidity: 95% RH
> Waterproof Rating: IP66
> Product Life: >50K Hrs
> Certification: CE, RoHs
> LED Color: Red, Green, Blue, Yellow, White.
> Outline Dimension: L114.5*W89*H85mm
> Base material: Aluminium Alloy covered by fluorocarbon.
Product Package：
10pcs/Carton, Carton Dimension: L600×W200×H250mm; G.W.: 15.5KG.
Product Characters：
10W Infrared induction flood light is an ideal product to replace the traditional MH/HL induction light, the light will be light on automatically when the sensor detected the infrared signal from personal body, the light will be turn off automatically after a time of 5 seconds to 10 minutes that can set by end user, this light has been widely used at Parking Lots, Corridor, warehouse and Security area.
Uniqued features of Low cost for maintenance, Long lifespan, Low heat generation, High efficiency, Energy saving , Environmental protection and high reliability for the LED flood light, so it is very popular on the market.
Utilized high brightness power LEDs as light source which manufactured in Taiwan, the chipset has stable reliability, high luminance and high color rendering index.
Very low thermal generation, light surface temperature rise is lower than 30 Deg.C, light efficiency can reach to 90%.
The case made with aluminum alloy material which helps to reduced self temperature of LED chipset, so make the led with longer lifespan, the product has a life time of 50K hours, light loss will be less than 5% within 1000 working hours.
The case is covered by fluorocarbon to avoid the case be oxidated in high moisture environmental, adopt high efficiency lens, the light was designed with waterproof and dustproof, also designed to work in high salt environmental.
A constant current LED driver was inside the light, no flicker, even illumination, noise is less than 15dB, the led driver has over voltage protection, over current protection, surge protection and short circuit protection.
No UV & IR, No radiation, No electromagnetic interference, No hazard material as Hg & Leads.
Energy saving about 75% compared with Halogen Lamp, it is really a Green product to our life.
After Sales Service：
1. If the product was damaged due to product quality issues, then please contact our sales immediately, we will arrange to ship the new product to customer, we will be charge for all costs, we can also return customer all funds.
2. Our guaranteed is 2 years, the product design life is 10 years.
Installation Notice：
The products must be installed by authorization person.
1. Switch off the main power before install the LED street light.
2. The working voltage is 110-240VAC, so need check the power supply voltage before installation.
3. Fix the light by screw on the wall or ground, and wiring the power supply to the light.
4. Turn on the main power, the light will be light up immediately.
